NUFAR ANTI-MOLD SOLUTION WITH SPRAYER, 0.5L
NUFAR ANTI-MOLD SOLUTION WITH SPRAYER, 0.5L
Regular price
€8,47
Regular price
Sale price
€8,47
Unit price
per
Tax included.
Shipping calculated at checkout.
Couldn't load pickup availability
Get it between -
Nufar anti-mold solution is a product with fungicidal action, effective in eliminating mold, fungi or hardened soap residues. The pleasant fragrance contributes to freshening the air in the entire room, and the specific smell of mold disappears.
! The effectiveness of the product has been tested and proven by the National Research - Development Institute for Microbiology and Immunology "Cantacuzino".
The sprayer is equipped with a safety element for children, to protect them against accidental opening.
The product can be used both inside the house and outside, for surfaces or objects in the open air. Thus, the solution is recommended for: walls, bathtub contours, sink contours, window contours, tile joints, bathroom curtains, silicone insulation, kitchen furniture, etc.
Use: a resistance test on a hidden surface is recommended. Apply the solution by spraying directly on the area infested with mold from a distance of 10 - 15 cm. Also, apply on the surrounding surface, on a perimeter of 40 - 50 cm. Wait 5-10 minutes, then remove the mold with a wet sponge. The product is used undiluted. To prevent the appearance of mold, treat the area once more, then let it dry without removing the solution. After drying, the surfaces can be cleaned in the usual way. Do not remove the mold before applying the treatment because the spores can spread around. For persistent stains, we recommend repeating the treatment.
! The effectiveness of the product has been tested and proven by the National Research - Development Institute for Microbiology and Immunology "Cantacuzino".
The sprayer is equipped with a safety element for children, to protect them against accidental opening.
The product can be used both inside the house and outside, for surfaces or objects in the open air. Thus, the solution is recommended for: walls, bathtub contours, sink contours, window contours, tile joints, bathroom curtains, silicone insulation, kitchen furniture, etc.
Use: a resistance test on a hidden surface is recommended. Apply the solution by spraying directly on the area infested with mold from a distance of 10 - 15 cm. Also, apply on the surrounding surface, on a perimeter of 40 - 50 cm. Wait 5-10 minutes, then remove the mold with a wet sponge. The product is used undiluted. To prevent the appearance of mold, treat the area once more, then let it dry without removing the solution. After drying, the surfaces can be cleaned in the usual way. Do not remove the mold before applying the treatment because the spores can spread around. For persistent stains, we recommend repeating the treatment.
